Warm-On heating cables will be used especially for complex room layouts. In comparison to a heating mat, the heating cable is not fixed on a mesh and can be adapted to every room layout. This provides a lot of flexibility.
In thermal insulated buildings the heating section could be used as a basic heating system when it is impossible to use a central heating system. This heating section is perfect for the installation in screed. The heating section can be laid under any floor cover of your choice: tile, marble or carpet floors.
Thanks to the proven double-core system the installation of the heating mat is very easy. The connection will be done only by one line which means that a rerouting of a second cold lead to the power supply is not required. The heating sections are made exclusively of high quality materials by world leading manufacturers.
Please note that for the installation of the heating section a thermostat with an appropriate temperature sensor is required. The temperature sensor is also embedded in the cement mortar. It should be placed in a corrugated tube in the middle of one cable loop. As an option we recommend one of our four thermostats which combine high functionality and attractive design. Furthermore, for the installation of the heating cable we recommend an assembly tape. This tape grants an evenly heat distribution as you will install the heating cable with constant spacing.
- Additional Information
Technical data table
Voltage 230 VAC Nominal Power 17 W/m Max. Operation Temp. 80°C Min. Operation Temp. -10°C Min. Storage Temp. -20°C Min. Installation Temp. -10°C Length 84 m Min Bending Radius 30 mm Heating Area 10.0 - 14.8 m² Cold lead length 3 m Cable Diameter ~ 5,5 - 7,8 mm IP Protection Level - Manufacturer Warranty Lifetime Warranty Certifications CE, VDE
- Documents & Downloads