Electric Underfloor Heating for tiles, stone and glued floorings 150 W/m²

More Views

Electric Underfloor Heating for tiles, stone and glued floorings 150 W/m²
39.99 £ 39.99 £
Incl. 20% VAT, incl. Shipping Cost Incl. 20% VAT, incl. Shipping Cost

Availability: In Stock

Delivery time: 1-3 Days

Quick Overview
  • Nominal power: 150 W/m²
  • suitable as a heating source for bathrooms, living- & bedrooms
  • as a kit or individualy
  • 100% maintenance free
  • 30 years warranty on the heating mat

* Required Fields

39.99 £ 39.99 £
Incl. 20% VAT, incl. Shipping Cost Incl. 20% VAT, incl. Shipping Cost
Description

Details

Applications

Electric floor heating systems with an output of 150 W/m² can be used as a primary heating source in the areas where the heating demand is not too high. Commonly such applications are bathrooms, kitchens as well as living rooms and bedrooms which are not located in the basement or directly under the roof.

For rooms with a higher heat requirement (e.g. cellar rooms, winter gardens or roofs), electric floor heating systems with 150 W/m² serve only for the floor heating purposes, but not as a room heating.

Our electric heating mats can be installed under all flooring types, that are covered with a tile glue or leveling compound (eg tiles, stone, glued parquet / carpet, etc.). If you install the underfloor heating using dry (floating) method, we recommend our aluminum heating mats.

Installation instructions

The use of a thermostat is mandatory when operating  electric underfloor heating. Choose your thermostat in a kit and save compared to the single unit prices. In addition, you will receive a corrugated tube , adhesive tape, floor primer and floor primer roller free of charge.

floor construction

tile floor construction

The heating mat is installed either in the screed or directly in the tile glue / leveling compound.

Electric underfloor heating should not be installed under stationary furniture without air circulation underneath (e.g kitchen cell). For this reason, the heating mat is generally installed with a wall spacing of at least 60 cm. In bathrooms, however, a wall distance of at least 3 cm will commonly be planned. The carrier material of the heating mat can be cut during installation but not the cable! Use the aid of our calculator to plan your underfloor heating.

We always recommend to use proper insulation with the underfloor heating to avoid unnecessary heat loss and consequential higher energy bills.

For an installation of the electric underfloor heating system under a glued flooring, a digital thermostat with display is to be selected (e.g. TP520, SE200 or MCS400), that allows a precise control over temperature and avoid damaging of sensible floor comerings (e.g. glued carpet, parquet, laminate).

Installation Video

 

Additional Information

Technical data table

Voltage 230 V~
Nominal Power Mats 150 W/m²
Total Power -
Max. Operation Temp. 80 °C
Min. Operation Temp. -10 °C
Min. Storage Temp. -20 °C
Min. Installation Temp. -10 °C
Width 0,5 m
Length -
Weight -
Cold lead length 2 m
Cable Diameter ca. 4 mm
IP Protection Level IP 67
Manufacturer Warranty Lifetime Warranty for Mats / 2 Years for Thermostat
Certifications CE
Documents & Downloads
Thermostat

Analogue Thermostat TP510

  • analogue thermostat TP510
  • LED indicator
  • energy saving
  • incl. Temperature sensor

Our analogue thermostat TP510 is our standard solution for temperature controlling. This thermostat is equipped with an on-off switch, a hand wheel for temperature settings as well as a LED display which shows the current status of your heating system.

Included temperature sensor will send signals to the thermostat. Due to those signals the thermostat will turn the heating system on or off according to the settings automatically. This technology enables an energy saving usage of your electrical heating system at very low costs.

Our analogue thermostat TP510 fits in every 60 mm flush mounting box and can be used in combination with any heating mat or heating section.

Digital Thermostat TP520

  • digital thermostat
  • programmable
  • energy saving
  • incl. Temperature sensor

Digital Thermostat with touchscreen display SE200

Digital Thermostat with touchscreen display SE200
  • touch thermostat
  • programmable
  • energy saving
  • incl. Temperature sensor

Our digital thermostat with touchscreen display SE200 is a programmable temperature controller with touch display. Thanks to its innovative technology like touch display, program mode, integrated self-optimization and the possible combination of floor and air sensor (integrated in the device). The thermostat is perfectly suitable for the control of your electrical underfloor heating system which leads to energy and cost saving. The thermostat combines highest reliability, easy handling and attractive design.

With our touch screen thermostat there are different options like a continuous running comfort temperature setting or the possibility to set the heating function individually for certain time period during the day. Furthermore our touch screen thermostat offers a freeze protection as well as a temperature decrease outside the heating periods. Each day of the week can be programmed individually.

Example:

You are waking up at 06:00 a.m. and leaving your home at 07:30 a.m. – With this thermostat you are in a position to define a heating period from 05:30 a.m. to 08:00 a.m.

Each day of the week can be programmed individually. This makes your thermostat as efficient as possible!

Our touch thermostat fits in every 60 mm flush mounting box and can be used in combination with any heating mat or heating section.

Thermostat MCS 400 Wifi / Wlan

  • control of heating system over local WiFi or remote via Smartphone
  • touch screen digital thermostat
  • economy operation mode
  • room and floor sensors
  • detailed operating instructions

The Cloud WiFi Thermostat is an innovative user friendly programmable thermostat with touch display that allows an economical and energy efficient operation of your comfort floor heating using the latest technology of touch display operation, integrated room sensor, external floor sensor, and controlling of operation settings when you are also not at home.

The Cloud WiFi Thermostat allows for heating systems to be controlled directly over the device touch screen display or by Smartphone APP.

Installation, connection between the Cloud WiFi Thermostat, the local WiFi router, and Smartphone are very easily connected between each other within minutes (see our installation video under the download tab).

Using either the touchscreen display or over the Smartphone, changing between Economy and 24/7 day program operation, changing of the temperatures for these operations, and even turning the heating system completely ON or OFF are most easily made with a touch of a button!

The 24/7 day PROGRAMM operation mode includes the setting the time and temperatures of 4 Events – WAKING UP, LEAVING HOME, COMING HOME and GOING TO SLEEP.

Changing to the ECONOMY operation mode is made with the touch of a button and operates the heating system according to a temperature setting of your choice between +10 °C to +21 °C. Just touch the ECONOMY operation mode again to change back to the PROGRAMM operation mode.

The temperatures for both operation modes can easily be adjusted at any time either over the touchscreen display or Smartphone.

The Cloud WiFi Thermostat can be used with any underfloor heating mat or cable not exceeding 230V/16A (3600W) total power requirement.

Installation of the thermostat can be easily made yourself. The thermostat fits into a standard plastic round recessed electrical box with a depth of 45mm and device installation screw distance of 60 mm. However, connection to the electrical power supply is recommended to be done by a qualified electrician.

Already seen?

To Professional Customer Online Shop

Special offers for industry, trade, resellers, business customers and companies.