Electric Underfloor Heating for tiles, stone and glued floorings 160 W/m² - Premium

More Views

Electric Underfloor Heating for tiles, stone and glued floorings 160 W/m² - Premium
44.99 £ 44.99 £
Incl. 20% VAT, incl. Shipping Cost Incl. 20% VAT, incl. Shipping Cost

Availability: In Stock

Delivery time: 1-3 Days

Quick Overview
  • Nominal power: 160 W/m
  • suitable as a primary heating source for bathrooms, living- and bedrooms
  • extra thin for low installation height
  • Premium quality - heating cables are sewn instead of glued
  • as a Kit with thermostat or separately
  • 100% maintenance free
  • lifetime warranty on the heating mat

* Required Fields

44.99 £ 44.99 £
Incl. 20% VAT, incl. Shipping Cost Incl. 20% VAT, incl. Shipping Cost
Description

Details

Applications

Electric floor heating systems with an output of 160 W/m² can be used as a primary heating source in the areas where the heating demand is not too high. Commonly such applications are bathrooms, kitchens as well as living rooms and bedrooms which are not located in the basement or directly under the roof.

For rooms with a higher heating demand (e.g. cellar rooms, winter gardens or roof area floorings), electric floor heating systems with 160 W/m² serve only as a floor heating, but not as a room heating.

Our premium heating mat stands out due to it’s exceptional thinness. It is, therefore, also suitable for rooms with a particularly low installation height.

Our electric heating mats can be installed under all floor coverings that are installed with a tile glue or where the heating mat is put into the leveling compound or screed (e.g. tiles, stone, glued parquet / carpet, etc.). When using a flooring type with the floating installation, we recommend our aluminum heating mats.

Installation instructions

The use of a thermostat is necessary for operation of the premium electric heating mat. We recommend you to select a thermostat for control of the heating an purchase an underfloor heating mat kit - thus saving compared to the single unit prices. Buying a kit you additionally receive a corrugated tube, high quality adhesive tape, floor primer and floor primer roller free of charge.

tile floor construction

The heating mat is installed either in the screed or directly in the tile glue / leveling compound.

To prevent heat build-up, an electric floor heating system should not be installed under fixed fixtures (for example, a cabinet wall, kitchen line, etc.) which does not allow air circulation under it. For this reason, the heating mat is usually installed with a wall spacing of at least 60 cm. In bathrooms, however, a wall distance of at least 3 cm to be planned, since there is seldom massive furniture alongside the walls. In case there are any pieces of furniture in your bathroom that completely cover the floor (no air circulation underneath), a distance of approx. 60 cm should also be planned. The carrier material of the heating mat can be cut during installation - heating cables, on the other hand, must never be cut or shortened! You should therefore calculate the appropriate size of the heating mat in advance -> our heating mats calculator helps you to make a qualified decision.

Prior to installing an electric underfloor heating system, please check whether the existing thermal insulation in the floor meet the latest technical requirements. Thus, high energy costs due to downward heat loss can be avoided. We recommend using additional insulating material.

When installing the underfloor heating system under a glued floorings, a thermostat with display is required for precise control of the temperature, which can be adjusted to a maximum of 30 ° C (for example TP520, SE200 or MCS400).

Installation Video

 

Additional Information

Technical data table

Voltage 230 V~
Nominal Power Mats 160 W/m²
Total Power -
Max. Operation Temp. 80 °C
Min. Operation Temp. -10 °C
Min. Storage Temp. -20 °C
Min. Installation Temp. -10 °C
Width 0,5 m
Length -
Cold lead length 4 m
Cable Diameter ca. 3 mm
IP Protection Level IP 67
Manufacturer Warranty Lifetime Warranty for Mats / 2 Years for Thermostat
Certifications CE
Documents & Downloads
Thermostat

Analogue Thermostat TP510

  • analogue thermostat TP510
  • LED indicator
  • energy saving
  • incl. Temperature sensor

Our analogue thermostat TP510 is our standard solution for temperature controlling. This thermostat is equipped with an on-off switch, a hand wheel for temperature settings as well as a LED display which shows the current status of your heating system.

Included temperature sensor will send signals to the thermostat. Due to those signals the thermostat will turn the heating system on or off according to the settings automatically. This technology enables an energy saving usage of your electrical heating system at very low costs.

Our analogue thermostat TP510 fits in every 60 mm flush mounting box and can be used in combination with any heating mat or heating section.

Digital Thermostat TP520

  • digital thermostat
  • programmable
  • energy saving
  • incl. Temperature sensor

Digital Thermostat with touchscreen display SE200

Digital Thermostat with touchscreen display SE200
  • touch thermostat
  • programmable
  • energy saving
  • incl. Temperature sensor

Our digital thermostat with touchscreen display SE200 is a programmable temperature controller with touch display. Thanks to its innovative technology like touch display, program mode, integrated self-optimization and the possible combination of floor and air sensor (integrated in the device). The thermostat is perfectly suitable for the control of your electrical underfloor heating system which leads to energy and cost saving. The thermostat combines highest reliability, easy handling and attractive design.

With our touch screen thermostat there are different options like a continuous running comfort temperature setting or the possibility to set the heating function individually for certain time period during the day. Furthermore our touch screen thermostat offers a freeze protection as well as a temperature decrease outside the heating periods. Each day of the week can be programmed individually.

Example:

You are waking up at 06:00 a.m. and leaving your home at 07:30 a.m. – With this thermostat you are in a position to define a heating period from 05:30 a.m. to 08:00 a.m.

Each day of the week can be programmed individually. This makes your thermostat as efficient as possible!

Our touch thermostat fits in every 60 mm flush mounting box and can be used in combination with any heating mat or heating section.

Thermostat MCS 400 Wifi / Wlan

  • control of heating system over local WiFi or remote via Smartphone
  • touch screen digital thermostat
  • economy operation mode
  • room and floor sensors
  • detailed operating instructions

The Cloud WiFi Thermostat is an innovative user friendly programmable thermostat with touch display that allows an economical and energy efficient operation of your comfort floor heating using the latest technology of touch display operation, integrated room sensor, external floor sensor, and controlling of operation settings when you are also not at home.

The Cloud WiFi Thermostat allows for heating systems to be controlled directly over the device touch screen display or by Smartphone APP.

Installation, connection between the Cloud WiFi Thermostat, the local WiFi router, and Smartphone are very easily connected between each other within minutes (see our installation video under the download tab).

Using either the touchscreen display or over the Smartphone, changing between Economy and 24/7 day program operation, changing of the temperatures for these operations, and even turning the heating system completely ON or OFF are most easily made with a touch of a button!

The 24/7 day PROGRAMM operation mode includes the setting the time and temperatures of 4 Events – WAKING UP, LEAVING HOME, COMING HOME and GOING TO SLEEP.

Changing to the ECONOMY operation mode is made with the touch of a button and operates the heating system according to a temperature setting of your choice between +10 °C to +21 °C. Just touch the ECONOMY operation mode again to change back to the PROGRAMM operation mode.

The temperatures for both operation modes can easily be adjusted at any time either over the touchscreen display or Smartphone.

The Cloud WiFi Thermostat can be used with any underfloor heating mat or cable not exceeding 230V/16A (3600W) total power requirement.

Installation of the thermostat can be easily made yourself. The thermostat fits into a standard plastic round recessed electrical box with a depth of 45mm and device installation screw distance of 60 mm. However, connection to the electrical power supply is recommended to be done by a qualified electrician.

Already seen?

To Professional Customer Online Shop

Special offers for industry, trade, resellers, business customers and companies.