Electric Underfloor Heating 150 W/m² for dry installation floorings: wooden, carpet, PVC

More Views

Electric Underfloor Heating 150 W/m² for dry installation floorings: wooden, carpet, PVC
43.99 £ 43.99 £
Incl. 20% VAT, incl. Shipping Cost Incl. 20% VAT, incl. Shipping Cost

Availability: In Stock

Delivery time: 1-3 Days

Quick Overview
  • Nominal power: 150 W/m
  • suitable as a heating source for bathrooms, living- & bedrooms
  • Laminate, Parquet & floating flooring
  • as a set with thermostat or individually
  • 100% maintenance free
  • 10 year warranty on the heating mat

* Required Fields

43.99 £ 43.99 £
Incl. 20% VAT, incl. Shipping Cost Incl. 20% VAT, incl. Shipping Cost



Electric floor heating systems with an output of 150 W/m² can be used as a primary heating source in the areas where the heating demand is not too high. Commonly this type of the mat will be used in bathrooms, kitchens as well as living rooms and bedrooms which are not located in the basement or directly under the roof.

For rooms with a higher heating demand (e.g. cellar rooms, winter gardens or roof area floorings), electric floor heating systems with 150 W/m² serve only as a floor heating, not as a primary heating of the room.

Electrical heating mats with aluminum foil are used in combination with floating type of installation floorings (e.g., laminate, PVC, carpet). In the case of PVC flooring or carpeted floors, a proper thermal conductivity of the floor covering is to be taken into account. We always suggest to consult with your flooring supplier beforehand if your new flooring meets the requirements for underfloor heating if the information is not provided otherwise. If you use a flooring that is laid with tile glue or leveling compound, we recommend our standard heating mats.

Installation instructions

The use of the underfloor heating is only allowed combination with a thermostat. Choose your desired controller with the heating mat and save compared to the single unit price. Opting for a kit you will also receive a corrugated tube, floor primer, floor primer roller and high quality adhesive tape free of charge.

Floor construction

tile floor construction

The aluminum heating mat is only applicable for dry (floating) installation types. It is not permitted to put the mat into glue or leveling compound.

Please note, that electric underfloor heating should not be installed under fixed fixtures (e.g. cabinet, kitchen cell, etc.). For this reason, the heating mat is usually installed with a wall spacing of at least 60 cm. In bathrooms, however, a smaller wall distance of at least 3 cm commonly will be planned. The mesh of the heating mat can be cut during installation - heating cables of the mat. Make sure not to cut or shorten the cable itself! This is why it is essential to choose the right size of the mat -> With the help of our calculator you can easily solve this problem.

To avoid higher heat loss and consecutive higher electricity demand we suggest to check whether the existing thermal insulation in the floor corresponds latest technical specifications before installing an electric underfloor heating system. We suggest to use additional thermal insulation. Just make sure the type of insulation is suitable for the underfloor heating system of your choice.

A thermostat with display is required for underfloor heating systems with the glued floorings. As a rule Temperatures of 28-30°C are usually not to be exceeded to avoid damaging of the flooring. Our digital thermostats (TP520, SE200 or MCS400) will keep precise temperature levels set by you.

Installation Video


Additional Information

Technical data table

Voltage 230 V~
Nominal Power Mats 150 W/m²
Total Power -
Max. Operation Temp. 80 °C
Min. Operation Temp. -10 °C
Min. Storage Temp. -20 °C
Min. Installation Temp. -10 °C
Width 0,5 m
Length -
Cold lead length 4 m
Cable Diameter ~ 1,18 - 1,62 mm
IP Protection Level IP X7
Manufacturer Warranty Lifetime Warranty for Mats / 2 Years for Thermostat
Certifications CE
Documents & Downloads

Analogue Thermostat TP510

  • analogue thermostat TP510
  • LED indicator
  • energy saving
  • incl. Temperature sensor

Our analogue thermostat TP510 is our standard solution for temperature controlling. This thermostat is equipped with an on-off switch, a hand wheel for temperature settings as well as a LED display which shows the current status of your heating system.

Included temperature sensor will send signals to the thermostat. Due to those signals the thermostat will turn the heating system on or off according to the settings automatically. This technology enables an energy saving usage of your electrical heating system at very low costs.

Our analogue thermostat TP510 fits in every 60 mm flush mounting box and can be used in combination with any heating mat or heating section.

Digital Thermostat TP520

  • digital thermostat
  • programmable
  • energy saving
  • incl. Temperature sensor

Digital Thermostat with touchscreen display SE200

Digital Thermostat with touchscreen display SE200
  • touch thermostat
  • programmable
  • energy saving
  • incl. Temperature sensor

Our digital thermostat with touchscreen display SE200 is a programmable temperature controller with touch display. Thanks to its innovative technology like touch display, program mode, integrated self-optimization and the possible combination of floor and air sensor (integrated in the device). The thermostat is perfectly suitable for the control of your electrical underfloor heating system which leads to energy and cost saving. The thermostat combines highest reliability, easy handling and attractive design.

With our touch screen thermostat there are different options like a continuous running comfort temperature setting or the possibility to set the heating function individually for certain time period during the day. Furthermore our touch screen thermostat offers a freeze protection as well as a temperature decrease outside the heating periods. Each day of the week can be programmed individually.


You are waking up at 06:00 a.m. and leaving your home at 07:30 a.m. – With this thermostat you are in a position to define a heating period from 05:30 a.m. to 08:00 a.m.

Each day of the week can be programmed individually. This makes your thermostat as efficient as possible!

Our touch thermostat fits in every 60 mm flush mounting box and can be used in combination with any heating mat or heating section.

Thermostat MCS 400 Wifi / Wlan

  • control of heating system over local WiFi or remote via Smartphone
  • touch screen digital thermostat
  • economy operation mode
  • room and floor sensors
  • detailed operating instructions

The Cloud WiFi Thermostat is an innovative user friendly programmable thermostat with touch display that allows an economical and energy efficient operation of your comfort floor heating using the latest technology of touch display operation, integrated room sensor, external floor sensor, and controlling of operation settings when you are also not at home.

The Cloud WiFi Thermostat allows for heating systems to be controlled directly over the device touch screen display or by Smartphone APP.

Installation, connection between the Cloud WiFi Thermostat, the local WiFi router, and Smartphone are very easily connected between each other within minutes (see our installation video under the download tab).

Using either the touchscreen display or over the Smartphone, changing between Economy and 24/7 day program operation, changing of the temperatures for these operations, and even turning the heating system completely ON or OFF are most easily made with a touch of a button!

The 24/7 day PROGRAMM operation mode includes the setting the time and temperatures of 4 Events – WAKING UP, LEAVING HOME, COMING HOME and GOING TO SLEEP.

Changing to the ECONOMY operation mode is made with the touch of a button and operates the heating system according to a temperature setting of your choice between +10 °C to +21 °C. Just touch the ECONOMY operation mode again to change back to the PROGRAMM operation mode.

The temperatures for both operation modes can easily be adjusted at any time either over the touchscreen display or Smartphone.

The Cloud WiFi Thermostat can be used with any underfloor heating mat or cable not exceeding 230V/16A (3600W) total power requirement.

Installation of the thermostat can be easily made yourself. The thermostat fits into a standard plastic round recessed electrical box with a depth of 45mm and device installation screw distance of 60 mm. However, connection to the electrical power supply is recommended to be done by a qualified electrician.

Already seen?

To Professional Customer Online Shop

Special offers for industry, trade, resellers, business customers and companies.