Frost protection heating cable "Pipe-Inside"
The "Pipe-Inside" frost protection heating cable is used primarily when you are unable to install a heating cable directly on to the pipe surface or you want to apply the heating cable to a pipe that is already laid down to a depth of up to 80 cm.
The "Pipe-Inside" frost protection cable is self-regulating. Self-regulating heating cables have the property of increasing their heating capacity when the temperature drops and decreasing when temperature rises again. This characteristic feature means not only energy savings but also more safety, as this functionality makes it impossible to overheat the heating cable, even when overlapped.
The heating cable is routed on the inside of a pipe. Please note that the heating cable may only be installed in pipes which do not come in contact with corrosive substances that could damage the heating cable. The heating cable has an IP68 protection, i. e. the heating cable is dustproof and permanently immersible.
With the cable you will receive all the accessories you need for installation: flat washers, rubber seal, screwed cable gland for connection.
In order to ensure a satisfactory performance of the product, the installation must always be in accordance with the enclosed operating instructions. Please take the time to read the instruction manual before using the product. We recommend to have the installation carried out by professionals.
Comes with EU Plug
- Additional Information
Technical data table
Voltage 230 VAC Nominal Power 10 W/m Max. Operation Temp. - Min. Operation Temp. - Min. Storage Temp. -30 °C Min. Installation Temp. - 20°C Cold lead length 2 m Cable Diameter ca. 7,0 mm IP Protection Level IPX7 Manufacturer Warranty 2 Years Certifications CE Min Bending Radius 35 mm
- Documents & Downloads